| POWER
UNITS (Electric) |
|
| Standard
(3-phase): |
222/380/420
Volts, 3-phase, 50 Hz (cycles). |
| 110v
3-phase on request: |
110
Volts, 3-phase 50 Hz or any of the above - 60 Hz. |
| Standard
Single-phase: |
Up
to 2 hp (1.5 kW) only.
110/120/220/240 Volts, single phase 50 Hz. |
| 110v,
60 Hz single phase on request: |
As
above, but 60 Hz. |
| Low
voltage units by special request: |
3-phase,
any other non-standard voltage. |
|
|
| POWER
UNITS (Air) |
Consumption
of free air per minute: 140 cu.ft. (3964.0 dm3) approx.
Pressure: 80/100 p.s.i. (5.4/6.8 bar). |
| FLEXIBLE
DRIVES STANDARD LENGTHS |
23
ft (7010.4 mm); 32ft (9753.6 mm) and 40 ft (12192.0 mm),
also lengths up to 100 ft (30480.0mm) available. Flexible
drives up to 11 mm inner core are supplied with shear pins.
Shear pins for larger drives can be supplied on request. |
| USE
OF EQUIPMENT Recommended speeds (rev/min) |
For
tubes 1/2" (12.70 mm) internal diameter up to 2"
(50.80 mm) i.d: 4500 or 2800.
For tubes 2" (50.80 mm) i.d: up to 3" (76.20 mm)
i.d: 2800. For tubes above 3" (76.20 mm) i.d: Contact
us for advice. |
| Bent
Tubes |
Special
flexible drives and toolheads will possibly be required.
Inform us
i) Minimum radious of bend
ii) Internal diameter of tube
iii) Length of Tube
So that we can make recommendations.
|
